Ily All-in-One Duplicator Manual do Utilizador

All-in-One Duplicator User’s Guide V 3.10

II. Function Introduction Chapter 1. MultiMedia Duplication Select Multimedia Dupe from the main menu and press to start F

II. Function Introduction 4. When the copy task has finished, the system will close the session. 5. The disc will be ejected, and you can co

II. Function Introduction 3. The system will detect the source and calculate how many discs will need. 4. After detecting, the system will st

II. Function Introduction 3. The system will detect the source and the target disc automatically. 4. After detecting, the system will start to co

II. Function Introduction 5. When the comparison has finished, press to go back to the previous menu. 3. Copy + Compare This function is to

II. Function Introduction 5. After detecting, the information of the device will show up. The information includes used space, total capacity and f

II. Function Introduction 1. Select 4.Information and press . 2. Select 3.System Info. and press to check the system’s information. 3

II. Function Introduction 5. When updating has finished, the system will ask you to reboot it. 6. Setup This section allows you to setup the

II. Function Introduction 2. Select 2.Disc Spanning and press . 3. Use / to enable or disable the copy function. ** Note: Disc spann

6-4. Burn Speed II. Function Introduction In this section, you can adjust CD, DVD and Blu-ray proper burning speed for duplication. 1. Select 6.S

Content Index I. Introduction 1. Features 3 2. System Overview 3 2-1. Package Contents 3 2-2. All-in-One Duplicator 3 2-3. All-in

II. Function Introduction Time Zone This setting allows you to setup the proper time zone of working place. Language You can set the language y

II. Function Introduction Function Table-Disc to Disc Duplication Disc Dupe When you select Disc duplicate, you will enter the disc to disc menu;

II. Function Introduction 8. Setup 1. Auto Start Time A l l o w t h e s y s t e m t o d o t h e Copy,Test, Compa

II. Function Introduction 9. HDD Manager 1. Select Image To select image file from HDD as your source for copy. 2. Disc=> Image To loa

II. Function Introduction Chapter 2. Disc Duplication Select Disc Dupe from the main menu and press to start disc to disc copy operation. 1. Co

II. Function Introduction **Note: Due to default setting of auto start time, the duplicator will start to copy automatically within a few seconds. Yo

II. Function Introduction **Note: 1 This function is unable to support DVD+R blank disc. 2 If you use CD/DVD rewritable discs as your blank media in

II. Function Introduction **Note: In Copy, Test, Compare and Copy+Compare functions 1 If there is no source and target discs inside the duplicator,

II. Function Introduction 6. Select Source You can set any drive or built-in HDD in the duplicator to be your source reader. 1. Using / to selec

II. Function Introduction 3. The information will show on the LCD as below: • Disc Info.: You can check the format of disc, burning speed supporte

1. Features I. Introduction • Multi-Session, MultiDisc, Disc Spanning, Disc to Disc duplication. • High speed DDR2 SDRAM. • Support various Flas

II. Function Introduction 3. Using / to select 1.Quick Erase. or 2.Full Erase. OR 4. Pressing to execute the erasing task. When the sys

II. Function Introduction 1. Place a source disc into reader. 2. Using / to select 7.Utility and press to enter the sub menu. Then, select 3.P

II. Function Introduction 7-6. Copy Counter This function will record the result of duplication. Show Count: You can check how many discs copy s

II. Function Introduction 3. The system will detect the update file and execute update task automatically. 4. Once the update job has done, the

II. Function Introduction 2. Pressing / to set the time. 8-2. Display Mode You can select the prefered display mode in Copy, Test, Compar

II. Function Introduction • Eject Target Only: Only eject target trays with disc inside once the system is booted up. • Eject Source Only: Only eje

II. Function Introduction **Note: Skip Read Error can not fix the error in the source disc, all it does is skipping the errors and keeps copying the

II. Function Introduction 9. HDD Manager (For HDD-installed duplicator) 9-1. Select Image You can select image file from HDD as your source for copy.

II. Function Introduction 4. When loading has finished, the disc will be ejected automatically. **Note: The source disc can be placed in any d

II. Function Introduction 1. Pressing / to select 9.HDD Manager and sub menu 5.Rename Image. 2. Pressing and select which image file you

I. Introduction 2-3. Display Interface Display LCD Backward Confirm/Execute Escape/Cancel Forward USB CF MS/MS Pro SD

II. Function Introduction 9-8. Format HDD This function allows you to format the built-in HDD while the HDD is NOT selected as reading source. You ca

III. Specification Model All-in-One 1T All-in-One 3T All-in-One 7T All-in-One 10TOperation StandaloneTarget 1:1 1:3 1:7 1:10 Function Flash

IV. FAQ Q1: Will ALL-IN-ONE800 transform my memory card data to DVD video or MP3 CD? A: ALL-IN-ONE800 will back up whatever you have in your o

I. Introduction 2-3. All-in-One Multimedia Duplicator Controls 5

I. Introduction 2-4. Main Function Structure There are two main functions of All-in-One series, one is Disc (CD/DVD/Blu-ray) Duplication,

I. Introduction • Disc Spanning: A big capacity memory card with large data can copy to several discs. Ex: USB 4GB d

I. Introduction Example of Multi-Session, MultiDisc and Disc Spanning Flash Source Multi-Session MultiDisc Disc Spanning Note 1 USB with 100MB

II. Function Introduction Function Table-Multimedia Duplication Multimedia Dupe When you select Disc duplicate, you will enter the disc to disc m